Body of a Vibrating Screen consists of a base frame and screen supporting structure. The base frame is welded using heavy channels and angles in order to contain the continuous vibration. Screen supporting structure and screen are made from wear resistant steel.
High strength Springs:
Suitable helical coiled springs are provided with the Vibrating Screen. Entire screen holding structure is supported by these springs. Special care has been taken to manufacture these springs which bear entire load along with continuous vibratory motion.
The foundation frame of the Driving Motor is provided by projection on one side of the Vibrating Screen and supports from base frame are also provided to hold the motor foundation. The size of motor varies as per the size of Vibrating Screen. Power requirement is 3 phase earthing through 16 Amps, 3 phase MCB.
The screens are made from special coiled sheets to provide sufficient resistance to wear and tear. The mesh size of the screening surface can be made as per the requirements of the customer.
The number of screening surface depends upon the number of decks of the screen. The inclination is given to the screen according to the suitability of work.
No. of Decks:
Normally 3 or 4 deck vibrating screens are provided against special request). In case of 3 or 4 deck Vibrating Screen special collecting (discharge) hoppers are also provided.