Tumbler Drum
Insmart Tumbler Drums
are trusted equipment to test and determine the resistance to degradation by impact and abrasion of hard lumpy ores like various Iron oxides, Sinter and Pellets, etc.
The test sample is placed in a standard Tumbler Drum and rotated for a specified number of revolutions. The sample is removed and screened by means of standard sieves. The individual size fractions are weighed. From the masses of the different size fractions obtained after sieving the Tumbler and Abrasion indices are calculated.
The equipment complies with IS:6495
| Material for wear resistance parts | Suitable Steel Grade |
| Motor | 3HP |
| Breaking | Mechanical System |
| Structure | MS Channels & Angles |
| Gear Box | MM Gears with 1 : 60 Ratio |
| Drum Plate Thickness | Side portion of 10 mm and 6 mm for periphery |
| Shaft | Suitable graded Hardened Steel |
| Control Panel | Consists of: Time control, RPM Control with Proper switches and accessories |
| Programmer | PLC/Microprocessor based |
| RPM speed DESIGNED | 25 rpm |
| Size of the DRUM | W 500 x L 1000 mm (Confirming to IS-6495:1984) |
| Steel angle Lifter | 50 X 50 X 5 mm. |
| Height of drum axis | 700 mm. |
| Electrical Power requirement | 4 Pole, 16 Amp MCB 3 Phase/ with earthing) A.C. 50/60 Hz, 415 Volts, Motor-2.2 Kw (3 H.P.) |